ghdrepairsstore.com

Submitted by: Lawrence J. Reaves

As gasoline moves from your gas tank to your engine, it passes through the fuel filter (FF). There are small particles in the gas that can clog your fuel injection system and wreak havoc within your engine. The filter prevents this from happening. This component allows gasoline to pass through while small particles and debris are caught.

Over time, the FF will become clogged from the accumulated debris. When this occurs, gas is prevented from passing through and reaching your engine. This too, causes problems. Many experts suggest replacing the fuel filter every 30,000 miles. This is a reasonable guideline, but is secondary to the mileage interval recommended by your owner’s manual.

Below, I’ll describe the steps you’ll need to take to change your vehicle’s FF. The filter costs less than $20; even though you can hire a mechanic to install it, you’ll save time and money by doing it yourself.

Moving Forward With Safety In Mind

The first – and arguably, most important – step is to relieve the pressure in the fuel lines. Pressure is necessary for the operation of your fuel injection system. Even when you turn your car off, pressure remains within the lines. You need to relieve it before you disconnect these lines. Otherwise, you risk injury.

The pressure is regulated by the fuel pump. This pump is usually controlled by a specific fuse. Locate the fuse (check your owner’s manual) and start your vehicle. With the engine idling, remove the fuse from its slot. The engine will die, expending all of the pressure within the fuel line in the process.

Disconnecting The Lines

With the pressure gone from the system, it’s time to disconnect the lines that are attached to the fuel filter. You’ll need two appropriately sized open-end wrenches to loosen the fittings. Once you have positioned the wrenches, place a small towel or rag on top of the fittings. This is an extra precaution against any remaining pressure in the line.

The proper method for loosening the fittings is to keep one wrench stationary (the one positioned on the fitting) while turning the other. Once the bolt has come off, set it aside and disconnect the line. You’ll also need to do this on the other side of the FF.

Removing The Old Component

Once both fuel lines (on either side of the fuel filter) have been disconnected, the next step is to remove the filter. There will likely be a metal mounting bracket holding the FF in place. This bracket is usually tightened around the body of the filter by a clamp. The clamp can be loosed with a screwdriver.

One quick note: even though you have disconnected the fuel lines, the filter will probably be nearly full of gasoline. The gas inside should be cool since the engine is dormant, but you should still use care when removing it.

Installing The Replacement

The next step is to install the replacement. Let’s go back to the bolts that held the fuel lines in place. Each bolt has a washer at the bottom of the threads. Now is a good time to replace these washers. But make sure the new washers match the old ones before installing the replacement filter and tightening the lines.

Place the mounting bracket around the new filter (make sure it’s pointing in the right direction). Reconnect the fuel lines to each side of the component and tighten the clamp that holds the bracket in place. At this point, installation is complete. Before you start your engine, make sure you replace the fuel pump fuse in the fuse box.

As mentioned earlier, a new fuel filter costs less than $20. If you have a mechanic install it, you’ll pay for his labor, which can be expensive. On the other hand, with a few tools, protective goggles, and approximately thirty minutes, you can perform the installation yourself.

About the Author: When looking for

Wichita Auto Dealer

, http://www.conklincarshutchinson.com/”>Wichita Kansas Honda and many other Kansas cars, trucks, and SUVs. Visit Conklin Cars online at: ConklinCars.com.

Source:

isnare.com

Permanent Link:

isnare.com/?aid=522374&ca=Automotive}

Auto dealer supplies: three items that market your company even better than your sales people.

by

Bob Keppel

Most vehicle dealerships commit too much money on cosmetic items that draw short-term focus on their cars. But they need to allocate a larger portion of their supplies budget to purchasing things that will more permanently brand their dealership with their current clients and create more recurring business and prospects. But they should allocate a larger portion of their supplies allowance to purchasing things that may more lastingly brand their car dealership with their current customers and create more recurring business and referrals.

A good example of this would be the service indication sticker label placed in the upper left corner of the customer’s windshield. This reminder sticker will only be successful in building repeat business if this includes your dealer logo and contact info. Simple stickers don’t build loyalty. They merely encourage your client to have their car maintained at the closest and cheapest service shop. License plate frames must be designed and chosen with forethought. The most significant source for new customers is currently your website, not your telephone number. Your internet site is easier to remember quickly. Insert your website address visibly towards the bottom of your plate frames. And in the event that your dealership has a particularly lengthy company name, shorten it in a fashion that is simple to remember and put this name near the top of the plate. This plate frame may be seen by up to 20 vehicles daily at red lights. Over a year, you may expect six hundred impressions. And over the duration of the vehicle, which may be about twelve years, you might receive 7000 impressions for your company. So, it’s obviously very important this be created correctly from the start. Finally, with each new sale, there is an opportunity to place a simple final detail on the deck lid of the customer’s vehicle. It’s normal for a lot of customers to ask that the decal be taken off. But if you provide them an excellent experience, they are happy to leave the decal in its place and promote your dealership for as long as they have the vehicle. Additionally note that graphics get more interest and views, because they are placed in an area where people do not often see a branding message. You may also extend a special branding sales message on your vinyl decals which you cannot fit on your plate frames. For under one dollar, you can create a long term investment in your dealership’s marketing message with vinyl stickers. So once you set a plan for marketing materials, make certain that at least 50% of these items will have a significantly longer lifespan than flags, balloons, and other short-term equipment. Invest for the long term, and you’ll receive long-term returns.

Bob Keppel is the creator of Applied Colors, a manufacturer of pro paint touch up kits for car dealers. He recently wrote an article identifying the 5 most crucial

car dealer supplies

should invest in.

Article Source:

Auto dealer supplies: three items that market your company even better than your sales people.}

byAlma Abell

With the frequency of auto accidents occurring every second of every day, chances are you will be involved in a car accident at some point in your life. With this in mind, it is important you are aware of the rights you hold when you are injured in an accident that was the fault of another driver. Most states require drivers to hold a certain amount of liability insurance. This covers you, should you be injured in an accident, due to the fault of someone else. Unfortunately, not all drivers obey the law and carry this insurance. Those who do have insurance are sometimes not adequately covered to provide compensation for all of the damages and injuries that can occur. In these types of cases, it is best to hire an auto accident attorney in Henderson Nevada. Through the attorney’s help, your rights can be protected and you can file a case to pursue the other driver for compensation.

What Can You Expect When You Hire an Auto Accident Attorney in Henderson Nevada? After your accident occurs, you will most likely begin getting calls from the insurance companies. They will want you to make statements, sign documents, and will possibly offer you settlement agreements. It is in your best interest to avoid any type of communication with these companies, without speaking with your attorney. This will help you to avoid making mistakes or hasty decisions that could cause you to lose out on the compensation you are entitled to.

After you have hired an attorney, he or she will begin the process of filing your case to the court. After you are given a hearing date, you may also be asked to attend a mediation meeting. While some cases are settled outside of court, this is not always obtainable in every case. Some cases end up going to court, where both sides present evidence to support their claims.

Through the help of your attorney, you can rest assured your case will receive the full focus needed, to help you get the best outcome possible. If you have been injured in an auto accident that has left you with damages and medical bills, contact Brian D. Nettles Law Offices for your appointment today.